150MP/100MP Aerial System

High productivity mapping and surveying

The 150MP/ 100MP Aerial Systems (PAS 150 MK2/ PAS 100 MK2) are based on the iXM-RS150F/ iXM-RS100F cameras. The systems come ready to work with a fully integrated iX Controller, stabilizer mount, and IMU unit.

150MP/ 100MP Aerial Systems

The 150MP/ 100MP Aerial Systems are fully integrated solutions based on the iXM-RS150F/ iXM-RS100F high-resolution metric cameras. Each aerial solution includes a camera, iX Controller with integrated Applanix GNSS-Inertial, Somag stabilizer, IMU unit, and Phase One flight planning and management software – iX Plan, iX Flight, and iX Capture.

  • Fully integrated Phase One Aerial System
  • Large image coverage
  • Exceptional accuracy and image quality
  • Optional 4-Band configuration with dual frame sensors for RGB and NIR imaging
  • Lightweight & low power
Phase One Aerial RGB

4-band configuration

The 4-band configuration is comprised of RGB and Achromatic cameras, with which images are captured in RGB and NIR bands simultaneously. Data is then processed automatically to generate distortion-free images and co-registration of the NIR pixels with the RGB is performed.

This function is extremely useful for remote sensing and mapping applications in the fields of agriculture, forestry and environment monitoring.

Phase One Aerial CIR

iXM-RS150F/ iXM-RS100F Aerial Cameras

iXM-RS150F is equipped with a full frame sensor (14204 x 10652 pixels), and a 3.76-micrometer pixel size to enable higher ground resolution from a greater flight altitude. It provides larger aerial coverage resulting in improved aerial survey productivity.

The camera comes with one of eight RS lenses ranging from 32mm to 180mm focal length, and the 300mm RSM lens. All lenses are equipped with a central leaf shutter to ensure geometrically correct aerial images.

  • BSI CMOS sensor
  • High dynamic range of 83 dB
  • Fast image capture rate of 2 frames per second
  • Recommended for high quality
  • 3D city models
iXM-RS150 / iXM-RS100 Phase One Cameras
Phase One iX Controller MK5 front
iX Controller 

The iX Controller, with integrated GNSS-Intertial, acts as a central hub for Phase One Aerial Systems and operates the cameras, gyro-stabilizing mount, IMU system, and runs iX Capture and iX Flight software.

SOMAG GYRO-STABILIZED MOUNT (CSM40) 

A small modular stabilization device that was specifically designed for the Phase One 150MP/ 100MP Aerial Solutions. With a low weight of 5.2 kg and a high payload of 15 kg, the special mount system is particularly suitable for ultralight aircraft.

Applanix IMU options

GNSS/IMU system

The Phase One 150MP/ 100MP Aerial Systems are available with different GNSS and IMU configurations to meet your application and accuracy levels requirements.

Download brochure for specifications >

Software

iX Plan

With its intuitive GUI and multiple control functions, the iX Plan application enables users to simply generate flight plans.

iX Flight

iX Flight is an interactive and intuitive flight management software for the precise execution of a mission, and comes uploaded to the iX Controller.

iX Capture

iX Capture is an aerial capture, control, and image processing software with an intuitive interface that displays key information such as exposure settings, histogram, GNSS/IMU data and frame count.

  • PAS 150 MK2/ PAS 100 MK2

    150MP/ 100MP Aerial Systems

    The 150MP/ 100MP Aerial Systems are fully integrated solutions based on the iXM-RS150F/ iXM-RS100F high-resolution metric cameras. Each aerial solution includes a camera, iX Controller with integrated Applanix GNSS-Inertial, Somag stabilizer, IMU unit, and Phase One flight planning and management software – iX Plan, iX Flight, and iX Capture.

    • Fully integrated Phase One Aerial System
    • Large image coverage
    • Exceptional accuracy and image quality
    • Optional 4-Band configuration with dual frame sensors for RGB and NIR imaging
    • Lightweight & low power
    Phase One Aerial RGB
  • 4-band configuration

    4-band configuration

    The 4-band configuration is comprised of RGB and Achromatic cameras, with which images are captured in RGB and NIR bands simultaneously. Data is then processed automatically to generate distortion-free images and co-registration of the NIR pixels with the RGB is performed.

    This function is extremely useful for remote sensing and mapping applications in the fields of agriculture, forestry and environment monitoring.

    Phase One Aerial CIR
  • iXM-RS150F/ iXM-RS100F Aerial Cameras

    iXM-RS150F/ iXM-RS100F Aerial Cameras

    iXM-RS150F is equipped with a full frame sensor (14204 x 10652 pixels), and a 3.76-micrometer pixel size to enable higher ground resolution from a greater flight altitude. It provides larger aerial coverage resulting in improved aerial survey productivity.

    The camera comes with one of eight RS lenses ranging from 32mm to 180mm focal length, and the 300mm RSM lens. All lenses are equipped with a central leaf shutter to ensure geometrically correct aerial images.

    • BSI CMOS sensor
    • High dynamic range of 83 dB
    • Fast image capture rate of 2 frames per second
    • Recommended for high quality
    • 3D city models
    iXM-RS150 / iXM-RS100 Phase One Cameras
  • Additional hardware
    Phase One iX Controller MK5 front
    iX Controller 

    The iX Controller, with integrated GNSS-Intertial, acts as a central hub for Phase One Aerial Systems and operates the cameras, gyro-stabilizing mount, IMU system, and runs iX Capture and iX Flight software.

    SOMAG GYRO-STABILIZED MOUNT (CSM40) 

    A small modular stabilization device that was specifically designed for the Phase One 150MP/ 100MP Aerial Solutions. With a low weight of 5.2 kg and a high payload of 15 kg, the special mount system is particularly suitable for ultralight aircraft.

    Applanix IMU options

    GNSS/IMU system

    The Phase One 150MP/ 100MP Aerial Systems are available with different GNSS and IMU configurations to meet your application and accuracy levels requirements.

    Download brochure for specifications >

  • Software

    Software

    iX Plan

    With its intuitive GUI and multiple control functions, the iX Plan application enables users to simply generate flight plans.

    iX Flight

    iX Flight is an interactive and intuitive flight management software for the precise execution of a mission, and comes uploaded to the iX Controller.

    iX Capture

    iX Capture is an aerial capture, control, and image processing software with an intuitive interface that displays key information such as exposure settings, histogram, GNSS/IMU data and frame count.

Upgrading to Phase One 150MP systems has improved our quality, timeliness, and made both our collection and processing more efficient and streamlined. The investment has been well worth the return

Logan Hancock

Vice President Imagery Solutions - Eagle Forestry Services, Inc.

Contact a Phase One Expert

If you would like to learn more about the PAS 150 MK2/ PAS 100 MK2  Aerial Systems, our experts are eager to help! Contact Us.