150MP/ 100MP Aerial Solution

High productivity mapping and surveying

The 150MP/ 100MP Aerial Solution (PAS 150/ PAS 100) is based on the iXM-RS150F/ iXM-RS100F Camera. This solution comes ready to work with a fully integrated iX Controller, stabilizer mount, and GPS/IMU equipment.

PAS 150/ PAS 100

The 150MP/ 100MP Aerial Solution (PAS 150/ PAS 100) is fully integrated system based on the iXM-RS150F/ iXM-RS100F high-resolution metric camera. Each aerial solution includes the camera and additional hardware, such as: the iX Controller, Somag stabilizer, Applanix GPS/ IMU unit, and the Phase One flight planning and management software iX Plan and iX Flight, as well as iX Capture.

  • Fully integrated Phase One Aerial Solution
  • Large image coverage
  • Exceptional accuracy and image quality
  • Optional 4-Band configuration with dual frame sensors for RGB and NIR imaging
  • Lightweight & low power
Phase One Aerial RGB

4-band configuration

The 4-band configuration is comprised of RGB and Achromatic cameras, with which images are captured in RGB and NIR bands simultaneously. Data is then processed automatically to generate distortion-free images and co-registration of the NIR pixels with the RGB is performed.

This function is extremely useful for remote sensing and mapping applications in the fields of agriculture, forestry and environment monitoring.

Phase One Aerial CIR

iXM-RS150F/ iXM-RS100F Aerial Cameras

iXM-RS150F is equipped with a full frame sensor (14204 x 10652 pixels), and a 3.76-micrometer pixel size to enable higher ground resolution from a greater flight altitude. It provides larger aerial coverage resulting in improved aerial survey productivity.

The camera comes with one of eight RS lenses ranging from 32mm to 180mm focal length, and the 300mm RSM lens. All lenses are equipped with a central leaf shutter to ensure geometrically correct aerial images.

  • BSI CMOS sensor
  • High dynamic range of 83 dB
  • Fast image capture rate of 2 frames per second
  • Recommended for high quality
  • 3D city models
iXM-RS150 / iXM-RS100 Phase One Cameras
iX Controller 

Designed to enable rapid data transfer, the iX Controller has the ability to control up to six Phase One aerial cameras independently. Built as a workhorse, the system boasts a small footprint and easily integrates into any aircraft.

SOMAG GYRO-STABILIZED MOUNT (CSM40) 

A small modular stabilization device that was specifically designed for the Phase One 150MP/ 100MP Aerial Solutions. With a low weight of 5.2 kg and a high payload of 15 kg, the special mount system is particularly suitable for ultralight aircraft.

Applanix

GNSS/IMU system

The Applanix’ POS AVX 210/ POS AV series enables direct georeferencing of aerial images. By integrating precision GNSS with inertial technology, POS AV enables precise determination of position and attitude. The Phase One 150MP/ 100MP Aerial Solution is also compatible with additional GNSS/IMU systems.

Software

iX Plan

With its intuitive GUI and multiple control functions, the iX Plan application enables users to simply generate flight plans.

iX Flight

iX Flight is an interactive and intuitive flight management software for the precise execution of a mission, and comes uploaded to the iX Controller.

iX Capture

iX Capture is an aerial capture, control, and image processing software with an intuitive interface that displays key information such as exposure settings, histogram, GNSS/IMU data and frame count.

 

  • PAS 150/ PAS 100

    PAS 150/ PAS 100

    The 150MP/ 100MP Aerial Solution (PAS 150/ PAS 100) is fully integrated system based on the iXM-RS150F/ iXM-RS100F high-resolution metric camera. Each aerial solution includes the camera and additional hardware, such as: the iX Controller, Somag stabilizer, Applanix GPS/ IMU unit, and the Phase One flight planning and management software iX Plan and iX Flight, as well as iX Capture.

    • Fully integrated Phase One Aerial Solution
    • Large image coverage
    • Exceptional accuracy and image quality
    • Optional 4-Band configuration with dual frame sensors for RGB and NIR imaging
    • Lightweight & low power
    Phase One Aerial RGB
  • 4-band configuration

    4-band configuration

    The 4-band configuration is comprised of RGB and Achromatic cameras, with which images are captured in RGB and NIR bands simultaneously. Data is then processed automatically to generate distortion-free images and co-registration of the NIR pixels with the RGB is performed.

    This function is extremely useful for remote sensing and mapping applications in the fields of agriculture, forestry and environment monitoring.

    Phase One Aerial CIR
  • iXM-RS150F/ iXM-RS100F Aerial Cameras

    iXM-RS150F/ iXM-RS100F Aerial Cameras

    iXM-RS150F is equipped with a full frame sensor (14204 x 10652 pixels), and a 3.76-micrometer pixel size to enable higher ground resolution from a greater flight altitude. It provides larger aerial coverage resulting in improved aerial survey productivity.

    The camera comes with one of eight RS lenses ranging from 32mm to 180mm focal length, and the 300mm RSM lens. All lenses are equipped with a central leaf shutter to ensure geometrically correct aerial images.

    • BSI CMOS sensor
    • High dynamic range of 83 dB
    • Fast image capture rate of 2 frames per second
    • Recommended for high quality
    • 3D city models
    iXM-RS150 / iXM-RS100 Phase One Cameras
  • Additional hardware
    iX Controller 

    Designed to enable rapid data transfer, the iX Controller has the ability to control up to six Phase One aerial cameras independently. Built as a workhorse, the system boasts a small footprint and easily integrates into any aircraft.

    SOMAG GYRO-STABILIZED MOUNT (CSM40) 

    A small modular stabilization device that was specifically designed for the Phase One 150MP/ 100MP Aerial Solutions. With a low weight of 5.2 kg and a high payload of 15 kg, the special mount system is particularly suitable for ultralight aircraft.

    Applanix

    GNSS/IMU system

    The Applanix’ POS AVX 210/ POS AV series enables direct georeferencing of aerial images. By integrating precision GNSS with inertial technology, POS AV enables precise determination of position and attitude. The Phase One 150MP/ 100MP Aerial Solution is also compatible with additional GNSS/IMU systems.

  • Software

    Software

    iX Plan

    With its intuitive GUI and multiple control functions, the iX Plan application enables users to simply generate flight plans.

    iX Flight

    iX Flight is an interactive and intuitive flight management software for the precise execution of a mission, and comes uploaded to the iX Controller.

    iX Capture

    iX Capture is an aerial capture, control, and image processing software with an intuitive interface that displays key information such as exposure settings, histogram, GNSS/IMU data and frame count.

     

Contact a Phase One Expert

If you would like to learn more about the PAS 150 / PAS 100 Aerial Solutions, our experts are eager to help! Contact Us.